Richard and many others are ready to assist you.
Control cabinets
We have both standard and customer-specific control cabinets available for controlling our HVAC products.
- Steel box with cylinder lock
- One 230V power supply group per devicewith a switchbox for several devices
- Digital time switch with weekly programme
- Day and night temperature regulator
- Holiday switch to operate devices at the night-time temperature over longer periods
- Steel box with cylinder lock
- Regulator for the room temperature and minimum inlet temperature restriction using 2-10Vdc control signal
- Selector for heat/off/ventilate
- Failure lamps for: – Burner failure – Intake air failure – Burner fan thermally off – Maximum failure – Dirty failure
- Operating lamps for: – Burner on – Burner in operation – Release of control
- Steel box with cylinder lock
- Regulator for the room temperature and minimum inlet temperature restriction using 2-10Vdc control signal
- Selector for heat / off / ventilate
- Digital time switch with weekly programme
- Holiday switch to allow devices to operate at the night-time temperature over longer periods
- Steel box with cylinder lock
- Regulator for the room temperature and minimum inlet temperature restriction using 2-10Vdc control signal
- Selector for heat / off / ventilate
- High/low selector supply fan selector
- Failure lamps for: – Burner failure – Intake air failure – Burner fan thermally off – Maximum/gas pressure failure – Dirty filter
- Steel box with cylinder lock
- Regulator for the room temperature and minimum inlet temperature restriction using 2-10Vdc control signal
- Selector for heat / off / ventilate
- High/low selector supply fan selector
- Digital time switch with weekly programme
- Steel box.
- Solenoid switch to control the fan.
- Connecting terminals for external room thermostat.
- Connecting terminals for external 3-position selector.
of Sill
and many others, we guarantee reliability in every system we build.
to people
- Steel box
- Solenoid switch to control the fan
- Connecting terminals for an external room thermostat
- Connecting terminals for external 3-position selector
What is a control cabinet?
The switch cabinets from Mark Climate Technology are sheet steel cabinets with electronic components for controlling air heaters, black tube heaters, air handling units and more. In addition, our control cabinets are equipped with lamps to indicate malfunctions or the operating mode of a device.
Our control cabinets can be equipped with time switches, selector switches and potential-free contacts. Room sensors are also supplied separately.
Customized control cabinets for any desired project
Controlling an HVAC system can be carried out in many ways. Everyone has their own ideas and wishes about this. Mark Climate Technology therefore has many options for this, from standard to project-based. The control of unit can be custom-made, for example a switch box that controls several devices. A lot is also possible with regard to the applied controls. For example, based on a day and night room temperature monitoring or on the room and supply temperature.
Mark has its own electrical engineering and assembly department and can therefore offer a solution for every application. Our advisors are happy to inform you about this. Please contact them about the possibilities of our range of control equipment.
The right control box for your Mark unit
Would you like advice on a custom switch box for controlling your Mark units? Please contact our technical advisors. We are happy to give you advice without any obligation. Send an e-mail to info@markclimate.com or contact us by telephone on +31 (0)598 656 612.